Flare
Elevated Flare on the Land
 

1) lnstruction
XFH-L elevated flare on the land burns the tailing gas,
The exhaust gas and the emergent gas.Its output volume is up to 50 tons/h. It is reliable for it is directly ignited on the top of the flare. Remote control and flame monitor system is provided.
It sends an alarm as the flame extinguished.
2)Typical structure

 

1.pilot flame
2.thermocouple
3.flare
4. spark rod
5. operation platform
6. molecule seal
7. ladder
8. ladder
9. ladder
10. control cabinet

 
   
Flare for Off-shore Platforms
 

1)lnstruction
XFH-F swirl flare is ideal for the drilling platform and oil
tankship in the sea. Its output volume is smaller than XFH-L¡¯s.
The flare surrounds with wind shield and oil holder for environmental
protection and against the storm. The buring tumbler is 30-40 meters
Long with motor and hydroulic press driving. The angle of rotation
is up to 270©b and it can stops anywhere.
2)Typical structure

1. wind shield
2. thermocouple
3. diffuser
4. Venturi mixer
5. nozzle
6. spark rod
7. register
8. water pipe
9. oil recycling valve
10. pilot gas guide tube
11. lgnitor
12. main gas valve

13. eledtrical valve
14. truss
15. lock pin
16. derrick
17. stell cable
18. fiexible pipe
19. explosion-proof motor
20. speed reducer
21. oil eduction valve
22. rotating bearing
23. base frame
24. control cabinet

 

FLARE